Mitutoyo Electronic Depth Gauges
All gauges have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the gauge directly to your PC.
10-pin data cables (sold separately) connect the gauge to a Mitutoyo miniprocessor or multiplexer.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the gauge to your PC without being tethered by a cable.
Base extensions (sold separately) increase the base width of your depth gauge to measure large diameter holes.
For technical drawings and 3-D models, click on a part number.
Depth Gauges | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Measuring Range | Accuracy | Measuring Increments | Measuring Blade | Base | Replacement Cases | |||||||||||||
Inch | Metric | Inch | Metric | Inch | Metric | Tip Wd. | Wd. | Material | Wd. | Lg. | Material | Overall Ht. | Batteries Included | Manufacturer Model Number | Each | Each | ||
0"-6" | 0 mm-150 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 0.2" | 0.63" | Steel | 4" | 11/16" | Steel | 9 1/4" | Yes | 571-211-30 | 000000000 | 0000000 | 0000000 | 000000 |
0"-8" | 0 mm-200 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 0.2" | 0.63" | Steel | 4" | 11/16" | Steel | 11 1/4" | Yes | 571-212-30 | 000000000 | 000000 | 0000000 | 00000 |
0"-12" | 0 mm-300 mm | ±0.0015" | ±0.040 mm | 0.0005" | 0.01 mm | 0.2" | 0.63" | Steel | 4" | 11/16" | Steel | 15 7/8" | Yes | 571-213-10 | 000000000 | 000000 | 000000 | 00 |
Mitutoyo Electronic Depth Gauges with Calibration Certificate
These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy. They have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the gauge directly to your PC.
10-pin data cables (sold separately) connect the gauge to a Mitutoyo miniprocessor or multiplexer.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the gauge to your PC without being tethered by a cable.
Base extensions (sold separately) increase the base width of your depth gauge to measure large diameter holes.
For technical drawings and 3-D models, click on a part number.
Depth Gauges | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Measuring Range | Accuracy | Measuring Increments | Measuring Blade | Base | Replacement Cases | |||||||||||||
Inch | Metric | Inch | Metric | Inch | Metric | Tip Wd. | Wd. | Material | Wd. | Lg. | Material | Overall Ht. | Batteries Included | Manufacturer Model Number | Each | Each | ||
0"-6" | 0 mm-150 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 0.2" | 0.63" | Steel | 4" | 11/16" | Steel | 9 1/4" | Yes | 571-211-30 | 000000000 | 0000000 | 0000000 | 000000 |
0"-8" | 0 mm-200 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 0.2" | 0.63" | Steel | 4" | 11/16" | Steel | 11 1/4" | Yes | 571-212-30 | 000000000 | 000000 | 0000000 | 00000 |
0"-12" | 0 mm-300 mm | ±0.0015" | ±0.040 mm | 0.0005" | 0.01 mm | 0.2" | 0.63" | Steel | 4" | 11/16" | Steel | 15 7/8" | Yes | 571-213-30 | 000000000 | 000000 | 000000 | 00 |
Economy Electronic Depth Gauges with Extension Rods
Connectable extension rods allow you to measure depths up to 22". This gauge has a zero-set button, which allows you to start measuring at any point.
Measuring Range | Accuracy | Measuring Increments | Base | Extension Rods | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric | Inch | Metric | Inch | Metric | Wd. | Lg. | No. of | Lg. | Dia. | Material | Overall Ht. | Batteries Included | Includes | Each | |
0"-22" | 0 mm-550 mm | ±0.001" | ±0.03 mm | 0.0005" | 0.01 mm | 4" | 0.63" | 6 | 1", 2", 3", 4", 5", 6" | 11/64" | Steel | 11" | Yes | One 1" Long × 0.078" Diameter Contact Point, One 1" Long Needle Contact Point | 0000000 | 0000000 |
Replacement Battery (1/Pkg.) | 0000000 | Pkg. | 00000 |
Harsh Environment Mitutoyo Electronic Depth Gauges
IP67 rated for protection from dust and temporary water submersion. These gauges have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the gauge directly to your PC.
10-pin data cables (sold separately) connect the gauge to a Mitutoyo miniprocessor or multiplexer.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the gauge to your PC without being tethered by a cable.
Base extensions (sold separately) increase the base width of your depth gauge to measure large diameter holes.
For technical drawings and 3-D models, click on a part number.
Measuring Range | Accuracy | Measuring Increments | Measuring Blade | Base | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric | Inch | Metric | Inch | Metric | Tip Wd. | Wd. | Material | Wd. | Lg. | Material | Overall Ht. | Batteries Included | Manufacturer Model Number | Each | |
0"-6" | 0 mm-150 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 0.2" | 0.63" | Stainless Steel | 4" | 11/16" | Stainless Steel | 9 1/4" | Yes | 571-261-20 | 000000000 | 0000000 |
Lg. | Each | ||
USB Data Cable | 80" | 000000 | 0000000 |
10-Pin Data Cable | 40" | 00000000 | 000000 |
10-Pin Data Cable | 80" | 00000000 | 000000 |
Wireless Data Transmitter | 1 3/4" | 000000 | 000000 |
Wireless Data Receiver | 5 1/2" | 000000 | 000000 |
Base Extension | 7" | 0000000 | 00000 |
Base Extension | 12" | 0000000 | 00000 |
Replacement Case | __ | 0000000 | 00000 |
Replacement Battery | __ | 00000000 | 0000 |
Harsh Environment Mitutoyo Electronic Depth Gauges with Calibration Certificate
These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy. All are IP67 rated for protection from dust and temporary water submersion. They have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the gauge directly to your PC.
10-pin data cables (sold separately) connect the gauge to a Mitutoyo miniprocessor or multiplexer.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the gauge to your PC without being tethered by a cable.
Base extensions (sold separately) increase the base width of your depth gauge to measure large diameter holes.
For technical drawings and 3-D models, click on a part number.
Measuring Range | Accuracy | Measuring Increments | Measuring Blade | Base | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric | Inch | Metric | Inch | Metric | Tip Wd. | Wd. | Material | Wd. | Lg. | Material | Overall Ht. | Batteries Included | Manufacturer Model Number | Each | |
0"-6" | 0 mm-150 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 0.2" | 0.63" | Stainless Steel | 4" | 11/16" | Stainless Steel | 9 1/4" | Yes | 571-261-20 | 000000000 | 0000000 |
Lg. | Each | ||
USB Data Cable | 80" | 000000 | 0000000 |
10-Pin Data Cable | 40" | 00000000 | 000000 |
10-Pin Data Cable | 80" | 00000000 | 000000 |
Wireless Data Transmitter | 1 3/4" | 000000 | 000000 |
Wireless Data Receiver | 5 1/2" | 000000 | 000000 |
Base Extension | 7" | 0000000 | 00000 |
Base Extension | 12" | 0000000 | 00000 |
Replacement Case | __ | 0000000 | 00000 |
Replacement Battery | __ | 00000000 | 0000 |
Starrett Depth Micrometers
Measure the depth of holes, slots, shoulders, and projections by changing out the steel extension rods supplied in 1" incremental lengths. The thimble has a constant-force mechanism, so that once the spindle contacts the surface of the measured object, it will stop tightening. This ensures repeatable measurements and prevents over-tightening.
For technical drawings and 3-D models, click on a part number.
Micrometers | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Base | Extension Rods | Replacement Cases | ||||||||||||
Measuring Range | Accuracy | Measuring Increments | Wd. | Lg. | Material | No. of | Lg. | Dia. | Overall Ht. | Manufacturer Model No. | Each | Each | ||
Ratchet Thimble | ||||||||||||||
0mm-75mm | ±0.007 mm | 0.01mm | 63.5mm | 39/64" | Steel | 3 | 1", 2", 3" | 3.2mm | 3 1/2" | 440MZ-75RL | 0000000 | 0000000 | 0000000 | 000000 |
0mm-150mm | ±0.007 mm | 0.01mm | 63.5mm | 39/64" | Steel | 6 | 1", 2", 3", 4", 5", 6" | 3.2mm | 3 1/2" | 440MZ-150RL | 0000000 | 000000 | 0000000 | 00000 |
Starrett Depth Micrometers with Calibration Certificate
These micrometers come with a calibration certificate traceable to NIST that states they've passed a test for accuracy. Change out the steel extension rods supplied in 1" incremental lengths to measure the depth of holes, slots, shoulders, and projections. The thimble has a constant-force mechanism, so that once the spindle contacts the surface of the measured object, it will stop tightening. This ensures repeatable measurements and prevents over-tightening.
For technical drawings and 3-D models, click on a part number.
Micrometers | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Base | Extension Rods | Replacement Cases | ||||||||||||
Measuring Range | Accuracy | Measuring Increments | Wd. | Lg. | Material | No. of | Lg. | Dia. | Overall Ht. | Manufacturer Model No. | Each | Each | ||
Ratchet Thimble | ||||||||||||||
0mm-75mm | ±0.007 mm | 0.01mm | 63.5mm | 39/64" | Steel | 3 | 1", 2", 3" | 3.2mm | 3 1/2" | 440MZ-75RL | 0000000 | 0000000 | 0000000 | 000000 |
0mm-150mm | ±0.007 mm | 0.01mm | 63.5mm | 39/64" | Steel | 6 | 1", 2", 3", 4", 5", 6" | 3.2mm | 3 1/2" | 440MZ-150RL | 0000000 | 000000 | 0000000 | 00000 |
Mitutoyo Electronic Depth Micrometers
Change out the steel extension rods supplied in 1" incremental lengths to measure the depth of holes, slots, shoulders, and projections. The thimble has a constant-force mechanism, so that once the spindle contacts the surface of the measured object, it will stop tightening. This ensures repeatable measurements and prevents over-tightening.
Zero-position memory, also known as absolute (ABS) positioning, retains the measuring position when the micrometer is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the micrometer directly to your PC.
10-pin data cables (sold separately) connect the micrometer to a Mitutoyo miniprocessor or multiplexer.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the micrometer to your PC without being tethered by a cable.
For technical drawings and 3-D models, click on a part number.
Measuring Range | Accuracy | Measuring Increments | Base | Extension Rods | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric | Inch | Metric | Inch | Metric | Wd. | Lg. | No. of | Lg. | Dia. | O'all Ht. | Batteries Included | Mfr. Model No. | Each | |
Ratchet Thimble | |||||||||||||||
0"-6" | 0-150 mm | ±0.00012" | ±0.003 mm | 0.00005" | 0.001 mm | 4" | 5/8" | 6 | 1", 2", 3", 4", 5", 6" | 5/32" | 12 3/4" | Yes | 329-350-30 | 00000000 | 0000000 |
0"-12" | 0-300 mm | ±0.00012" | ±0.003 mm | 0.0001" | 0.001 mm | 4" | 5/8" | 12 | 1", 2", 3", 4", 5", 6", 7", 8", 9", 10", 11", 12" | 5/32" | 18" | Yes | 329-351-30 | 00000000 | 000000 |
Mitutoyo Electronic Depth Micrometers with Calibration Certificate
These micrometers come with a calibration certificate traceable to NIST that states they've passed a test for accuracy. Change out the steel extension rods supplied in 1" incremental lengths to measure the depth of holes, slots, shoulders, and projections. The thimble has a constant-force mechanism, so that once the spindle contacts the surface of the measured object, it will stop tightening. This ensures repeatable measurements and prevents over-tightening.
Zero-position memory, also known as absolute (ABS) positioning, retains the measuring position when the micrometer is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the micrometer directly to your PC.
10-pin data cables (sold separately) connect the micrometer to a Mitutoyo miniprocessor or multiplexer.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the micrometer to your PC without being tethered by a cable.
For technical drawings and 3-D models, click on a part number.
Measuring Range | Accuracy | Measuring Increments | Base | Extension Rods | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric | Inch | Metric | Inch | Metric | Wd. | Lg. | No. of | Lg. | Dia. | O'all Ht. | Batteries Included | Mfr. Model No. | Each | |
Ratchet Thimble | |||||||||||||||
0"-6" | 0-150 mm | ±0.00012" | ±0.003 mm | 0.00005" | 0.001 mm | 4" | 5/8" | 6 | 1", 2", 3", 4", 5", 6" | 5/32" | 12 3/4" | Yes | 329-350-30 | 00000000 | 0000000 |
0"-12" | 0-300 mm | ±0.00012" | ±0.003 mm | 0.0001" | 0.001 mm | 4" | 5/8" | 12 | 1", 2", 3", 4", 5", 6", 7", 8", 9", 10", 11", 12" | 5/32" | 18" | Yes | 329-351-30 | 00000000 | 000000 |
Water-Resistant Economy Electronic Depth Micrometers
IP54 rated for limited protection from dust and splashing water. Change out the steel extension rods supplied in 1" incremental lengths to measure the depth of holes, slots, shoulders, and projections. The thimble has a constant-force mechanism, so that once the spindle contacts the surface of the measured object, it will stop tightening. This ensures repeatable measurements and prevents over-tightening.
Zero-position memory, also known as absolute (ABS) positioning, retains the measuring position when the micrometer is turned off. A zero-set button allows you to start measuring at any point.
Measuring Range | Accuracy | Measuring Increments | Base | Extension Rods | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric | Inch | Metric | Inch | Metric | Measuring Blade Material | Wd. | Lg. | Material | No. of | Lg. | Dia. | Overall Ht. | Batteries Included | Each | |
Ratchet Thimble | ||||||||||||||||
0"-6" | 0 mm-150 mm | ±0.0001" | ±0.0025 mm | 0.00005" | 0.001 mm | Steel | 4" | 11/16" | Steel | 6 | 1", 2", 3", 4", 5", 6" | 3/16" | 5 1/2" | Yes | 000000 | 0000000 |
Replacement Battery | 00000000 | Pkg. | 00000 |
Pocket Rulers
Rulers are narrow and just 6" long to measure in tight spaces. They have a pocket clip that can also be used as a depth gauge, with the clip as the base. Inch and inch/metric rulers labeled with numeric increments that are less than 1" are quick reading.
Stainless steel rulers resist corrosion better than aluminum rulers. They have wear-resistant etched markings.
Flexible rulers are good for measuring slightly curved surfaces.
Lg. | Front Graduation Marks (Numeric Increments) | Wd. | Thick. | Flexibility | Color | Graduation Mark Style | End Shape | Each | |
Inch/Metric—Left to Right Reading Direction | |||||||||
---|---|---|---|---|---|---|---|---|---|
Stainless Steel | |||||||||
6"/150 mm | 16ths (1"), Millimeters (10 mm) | 1/4" | 1/64" | Flexible | Silver | Etched | Square | 0000000 | 00000 |
6"/150 mm | 32nds (1"), Millimeters (10 mm) | 1/2" | 1/64" | Flexible | Silver | Etched | Round | 0000000 | 0000 |
6"/150 mm | 64ths (8/64"), Millimeters (1 cm) | 1/2" | 1/64" | Flexible | Silver | Etched | Round | 0000000 | 0000 |
6"/150 mm | Millimeters (10 mm), 16ths (1") | 1/2" | 1/64" | Flexible | Silver | Etched | Round | 0000000 | 0000 |
Metric—Left to Right Reading Direction | |||||||||
Stainless Steel | |||||||||
150 mm | 1/2 mm (10 mm), Millimeters (10 mm) | 1/2" | 1/64" | Flexible | Silver | Etched | Round | 0000000 | 0000 |
Pocket Center-Finding Rulers
Slip these rulers into your pocket, so they’re always on hand to find center readings. All are narrow and about 6" long to measure in tight spaces. Zero marks the center when these rulers are positioned so the same number touches each side of an object. Made of aluminum, they’re lightweight and corrosion resistant.
Lg. | Front Graduation Marks (Numeric Increments) | Wd. | Thick. | Flexibility | Color | Graduation Mark Style | Each | |
Metric—Left to Right/Right to Left Reading Direction | ||||||||
---|---|---|---|---|---|---|---|---|
Aluminum | ||||||||
16 cm | Millimeters (1 cm) | 3/4" | 3/64" | Flexible | Silver | Printed | 0000000 | 00000 |
Pocket Architects’ and Engineers’ Scales
Small enough to fit into your pocket, the blade is narrow and only 6" long. These scales are often used for taking measurements off scaled architectural or engineering drawings.
Scale Type | Graduation Marks | Blade Length | Each | |
Triangle with Beveled Edges | ||||
---|---|---|---|---|
Inch, Metric | ||||
Architects', Engineers' | 1/8", 1/4", 16", 10ths, 50ths, 1:500, 1:100 | 6" | 0000000 | 000000 |