We will reply to your message within an hour.
In addition to oil, these blended aramid fiber/Buna-N rubber gaskets resist water and aliphatic hydrocarbons such as ethylene.
Reinforced with fiberglass filler for strength, these PTFE gaskets won't thin out when compressed.
These blended aramid fiber/Buna-N rubber gaskets also resist water and aliphatic hydrocarbons such as ethylene.
Often called controlled swell gaskets, these gaskets absorb water near the inside of the flange and swell to fill gaps. Use them on uneven surfaces, such as grooved, corroded, or pitted flanges.
A fiberglass filler in these PTFE gaskets provides strength to prevent them from thinning out when compressed.
Made from a blend of aramid fiber and Buna-N rubber.
Inherently sticky, this silicone gel material conforms to irregular surfaces and stays in place for an effective moisture barrier.
A fiberglass filler in this PTFE gasket material provides strength and prevents it from thinning out when compressed.
To prevent contamination in your line, these gaskets set off metal detectors if a piece as small as 1 mm wears off. They’re EPDM, so the tight seal they form in stainless steel quick-clamp tube fittings withstands moist environments.
If a piece wears off, fragments as small as 1 mm can be picked up by a metal-detection system to prevent contamination of your process line.
In addition to oil, these Buna-N gaskets resist water and salts.
Create a tight seal when connecting Swedish Milk Standard (SMS) fittings.
Form a tight seal on cam-and-groove hose connections without fear of contaminating your food processing line. The metal additive in these gaskets can be picked up by a metal detector, so you can find and remove them if they fall into your line.
Also resist aliphatic hydrocarbons, such as ethylene.
Use cartridges with a standard caulk gun for quick and easy dispensing.
These gasket makers come in a tube.
Dispense a uniform bead when you press the nozzle.
Create gaskets that can flex to accommodate movement and won’t degrade from oil.
These gasket makers combine oil resistance and the flexibility to accommodate movement.
FDA compliant, these seals can directly touch food. They’re made of Buna-N foam, so they resist oil, grease, salts, water, and most detergents.
Similar to standard silicone seals, fluorosilicone rubber seals can be used at high temperatures, but also withstand fuel and oil.
Seal food areas that can reach temperatures up to 375° F.
FDA compliant and made of silicone rubber, these seals are safe for direct contact with food and in temperatures up to 350° F.
Made of fluorosilicone rubber, these seals withstand high temperatures like standard silicone without breaking down when exposed to fuel and oil.
Flexible even at temperatures as low as -60° F, these fluorosilicone O-rings will keep your fittings free from leaks. They’re often used on fuel and coolant hose because fluorosilicone resists many chemicals, including ethanol and ethylene glycol.
These fluorosilicone O-rings remain flexible at temperatures as low as -60° F. They resist ethanol, ethylene glycol, and isopropyl alcohol.
If these O-rings deteriorate, they can be picked up by metal detection systems.
Commonly called memory foam and Confor, these sheets and strips have the best cushioning qualities of all the foam we offer.
Also known as Ethafoam.
Similar to a sponge, this open-cell foam absorbs and holds up to 30 times its weight in liquid.
Know at a glance when a tool is missing from a toolbox with this dual-color foam.
Made of FDA-listed materials, these sheets and strips are for use with food.
Use in food-processing environments for cutting surfaces, liners, and other high-wear applications. These sheets and strips are FDA compliant for direct contact with food.
Made from FDA-compliant materials for use with food and beverage, these sheets and strips won’t degrade from animal and vegetable oils.
Temperatures as low as –70° F have no effect on these fluorosilicone sheets and strips.
Support shafts, bearings, and other moving parts that are routed through a hole. These grommets are slippery to allow parts to move freely in the hole. Install them on thin sheet-metal panels.
Seal T-slots, rail ends, and gaps between rails to keep out dust, debris, and other contaminants.
Ribbed grommets are more flexible than our smooth vibration-damping grommets, so they're easier to install.
Press these grommets into a hole to add cushion on both sides.
Use these in place of normal washers to damp vibration and cushion your joint.
Easier to install than grommets, push these bushings through your mounting hole to dampen vibration. Use them with a vibration-damping washer to isolate vibration.
Ribbed bushings are more flexible than our smooth vibration-damping bushings, so they're easier to install.
Replace the standard O-ring/backup ring combination with a more reliable alternative—these head seals resist twisting and remain stable even in applications with fluctuating pressure.
A square O-ring prevents these piston seals from rocking in the groove.
A two-lip design means that these wipers also function as a rod seal.
Replace wipers in open-groove cylinders—these wipers have an integral steel case so they press fit into the groove around the rod.
These washers withstand harsh chemicals such as acetic acid and isopropyl alcohol.
Made from silicone, these sealants are RTV (room-temperature vulcanizing).
With chemical and metal additives that are picked up by X-ray machines and metal detectors, these sealants are designed to help you comply with Hazard Analysis and Critical Control Point (HACCP) programs in food-processing facilities.
Make tough, flexible, oil-resistant seals.
Wrap this tape tightly around pipe and other surfaces to seal cracks and joints without having to shut down your system.
This sleeving withstands temperatures up to 390°F and is often used to insulate connections in transformers and relays. It prevents electricity and heat from dissipating from wire and cable.