About Oil
More
About Lubricants
More
Penetrating Lubricants
Cut through dirt, grease, and rust, loosen stuck fasteners, and protect tools and equipment with these thin, multipurpose lubricants.
Lubricants cannot be sold to the listed regions due to import regulations, product labeling requirements, or regulatory limits on VOCs (volatile organic compounds).
WD-40 stops squeaks, frees sticky mechanisms, loosens rusted parts, protects against corrosion, and displaces moisture.Optional spray bottle can be refilled with WD-40 from a can or drum.
LPS No. 1 Greaseless dries to form a lubricating film that resists dust, dirt, and oil. LPS No. 2 Industrial Strength leaves an oily film for long-lasting lubrication with up to a year of corrosion resistance.
CRC 3-36 cleans, lubricates, and displaces moisture. It forms a clear, thin film that protects against wear and corrosion.
Container | Each | ||||
---|---|---|---|---|---|
Size, gal. | Type | Temp. Range, °F | Cannot Be Sold To | Each | |
CRC 3-36 | |||||
5 | Drum | -50° to 250° | Outside United States | 0000000 | 0000000 |
Milling, Turning, and Sawing Lubricants
These lubricants reduce friction between your cutting tool and workpiece to make cutting cycles faster and easier, improve surface finishes, and extend tool life. They are chlorine free for use where chlorine waste disposal is a concern.
Lubricants for use with cast iron, stainless steel, and steel will stain other metal. Use them at full strength or blended with other oil.
Use LPS Tapmatic lubricants at full strength. Tapmatic Natural is based on natural oil. It’s designed for use on steel and aluminum, but can be used on all metal. It is sulfur free.
Lubricants that cannot be sold to the regions listed exceed local regulatory limits on VOCs (volatile organic compounds).
Container | Each | ||||
---|---|---|---|---|---|
Size | Type | Compatible With | Cannot Be Sold To | Each | |
LPS Tapmatic Natural | |||||
5 gal. | Drum | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | Outside United States | 0000000 | 0000000 |
Stamping and Drawing Vanishing Oil
Apply this oil to sheet metal up to 0.025” thick before stamping or drawing to extend die life. It quickly evaporates, leaving behind a thin, easy-to-clean film. It is chlorine free, for use where chlorine waste disposal is a concern, and sulfur free. Use at full strength. It cannot be sold to the regions listed due to regulatory limits on VOC (volatile organic compounds).
Container | Each | ||||
---|---|---|---|---|---|
Size, gal. | Type | Compatible With | Cannot Be Sold To | Each | |
5 | Drum | Aluminum, Brass, Carbide, Cast Iron, Copper, Iron, Nickel, Stainless Steel, Steel, Titanium | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA | 0000000 | 0000000 |
55 | Drum | Aluminum, Brass, Carbide, Cast Iron, Copper, Iron, Nickel, Stainless Steel, Steel, Titanium | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA | 0000000 | 00000000 |
Slide and Way Oil
Formulated to reduce friction and wear, this oil ensures smooth, uniform motion of slides, tracks, and ways. It’s tacky, so it even sticks to vertical surfaces to provide long-lasting lubrication.
Viscosity is the thickness of an oil. The higher the grade, the thicker the oil, and the less it flows.
Because clear oil doesn’t contain sulfur, it’s safe for the environment and also limits bacteria growth. But it doesn’t resist wear as well as oil with sulfur.
Hydraulic Oil
Wear-resistant properties keep hydraulic pumps and equipment working, even in high-pressure systems.
Viscosity is the thickness of an oil. The higher the grade, the thicker the oil, and the less it flows.
Viscosity Grade | Container | Each | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
ISO | AGMA | SAE | SSU | Size, gal. | Type | Temp. Range, °F | Color | With Detergent | Each | |
Mineral Base Oil | ||||||||||
32 | __ | 10W | 155 @ 100° F | 55 | Drum | -20° to 150° F | Amber | No | 0000000 | 0000000 |
46 | 1 | 10W | 215 @ 100° F | 55 | Drum | -20° to 150° F | Amber | No | 0000000 | 000000 |
68 | 2 | 20 | 325 @ 100° F | 55 | Drum | -20° to 150° F | Amber | No | 0000000 | 000000 |
100 | 3 | 30 | 525 @ 100° F | 55 | Drum | -10° to 150° F | Amber | No | 0000000 | 000000 |
Air Compressor Oil
Reduce wear on rings, cylinders, and other moving parts in most major manufacturers' air compressors.
Viscosity is the thickness of an oil. The higher the grade, the thicker the oil, and the less it flows.
Synthetic oil lasts longer than mineral oil and withstands a wider range of temperatures.
Viscosity Grade | Container | Each | ||||||
---|---|---|---|---|---|---|---|---|
ISO | SSU | Size | Type | Temp. Range, °F | Color | With Detergent | Each | |
Mobil Rarus 824—Synthetic Base Oil | ||||||||
32 | 135 @ 100° F | 5 gal. | Drum | -45° to 250° | Yellow | No | 0000000 | 0000000 |
Diesel Exhaust Fluid
For use in selective catalytic reduction (SCR) systems, this fluid reduces the air pollution from your diesel engine to help you comply with EPA guidelines. Commonly known as DEF, it contains urea to convert nitrous oxide (NOx) into water vapor and nitrogen for cleaner emissions. It meets ISO 22241-1 and American Petroleum Institute standards for diesel exhaust fluid.
Container | |||||||||
---|---|---|---|---|---|---|---|---|---|
Size, gal. | Type | Temperature Range, °F | Color | For Engine Type | Primary Chemical | Specifications Met | Certification | Each | |
Water Based | |||||||||
55 | Drum | 20° to 210° | Clear | Diesel | Urea (32.5%) | ISO 22241-1 | API Certified Diesel Exhaust Fluid | 00000000 | 0000000 |
Powder and Flake Lubricants
Made of graphite, these powders and flakes lubricate under heavy loads and high temperatures. They resist most chemicals and conduct heat and electricity.
Powder lubricants get into hard-to-reach spots, such as locking mechanisms and fastener threads, better than flakes. Lubricant in a can and drum can be used dry or mixed with oil and grease to increase their load-carrying capacity or improve their ability to conduct heat and electricity.
Container | Each | |||||
---|---|---|---|---|---|---|
Net Weight | Type | Additive | Temp. Range, °F | Color | Each | |
Powder Lubricant | ||||||
50 lbs. | Drum | Graphite | -300° to 700° | Silver | 0000000 | 0000000 |
Chemicals
Air-Powered Container-Mount Grease Dispensers
Dispense from your drum or pail of grease using compressed air. Dispensers include a follower plate that moves down the inside of the container as the grease level drops to compress the grease and prevent vapor pockets. Containers not included.
Dispensers deliver grease at the same pressure as your existing grease system, up to the max. grease outlet pressure. Dispensers with a booster gun allow you to increase the pressure to the value listed for max. grease outlet pressure with booster.
Styles A-D have a Z-swivel that connects the outlet hose to the gun and prevents the hose from kinking.
For technical drawings and 3-D models, click on a part number.
Dispensers | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Container | Air Inlet | Replacement Follower Plates | ||||||||||||||
Style | Max. Dia. | Max. Ht. | Flow Rate, oz./min. | For NLGI Viscosity Grade | Max. Grease Outlet Pressure, psi | Max. Grease Outlet Pressure with Booster, psi | Grease Outlet Hose Lg., ft. | Material | Max. Pressure, psi | Thread Type | Pipe Size | Gender | Each | Each | ||
With Booster Gun | ||||||||||||||||
A | 15 15/16" | 26" | 16 | 00, 0, 1, 2 | 7,500 | 10,000 | 13 | Steel | 150 | NPT | 1/4 | Female | 0000000 | 000000000 | 0000000 | 0000000 |
C | 14 7/8" | 27 1/4" | 64 | 00, 0, 1, 2 | 7,500 | 10,000 | 10 | Steel | 150 | NPT | 1/4 | Female | 00000000 | 00000000 | 0000000 | 000000 |
D | 14 7/8" | 27 1/4" | 64 | 00, 0, 1, 2 | 7,500 | 10,000 | 10 | Steel | 150 | NPT | 1/4 | Female | 00000000 | 00000000 | 0000000 | 000000 |
With Standard Gun | ||||||||||||||||
C | 14 7/8" | 27 1/4" | 32 | 00, 0, 1, 2 | 7,500 | __ | 10 | Steel | 150 | NPTF | 1/4 | Female | 0000000 | 00000000 | 0000000 | 000000 |
D | 14 7/8" | 27 1/4" | 32 | 00, 0, 1, 2 | 7,500 | __ | 10 | Steel | 150 | NPTF | 1/4 | Female | 0000000 | 00000000 | 0000000 | 000000 |
For Container | Grease Outlet | Air Inlet | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Max. Dia. | Max. Ht. | Flow Rate, oz./min. | For NLGI Viscosity Grade | Max. Grease Outlet Pressure, psi | Hose Lg., ft. | Thread Type | Pipe Size | Gender | Material | Max. Pressure, psi | Hose Lg. ft. | Thread Type | Pipe Size | Gender | Each | |
E | 23 5/8" | 36 13/16" | 64 | 00, 0, 1, 2 | 7,500 | 4 | NPT | 3/8 | Male | Steel | 150 | 3 | NPT | 1/4 | Female | 00000000 | 000000000 |